Installation and hardware
21
Bonito PRO Technical Manual V1.0.0
Powering the camera
A camera power adapter for each Bonito PRO camera is available from Allied
Vision. See
for connector definition and voltage
specifications.
For a complete list of supported frame grabbers including limitations, see the
Hardware Selection for Bonito PRO Cameras
application note.
https://www.alliedvision.com/en/support/technical-papers-knowledge-
base.html
Contact your Allied Vision Sales representative or your local Allied Vision
distribution partner for lens recommendations:
https://www.alliedvision.com/en/meta-header/contact/contact-sales
The Euresys Coaxlink Quad G3 frame grabber and GenICam browser were used to
create the screenshots in this document.
NOTICE
Powering the camera
•
Use only DC power supplies with insulated cases.
•
Do not exceed the wattage as specified in the
chapter.
•
For all power connections use only shielded cables to avoid electromagnetic
interference.
•
Bonito PRO cameras can be powered from either the Hirose I/O port or via
PoCXP. Power supplied via Hirose I/O takes priority over power supplied via
PoCXP.
•
When powering the camera via the Hirose I/O port, use a power supply
recommended by Allied Vision
CXP-6
Bonito PRO cameras stream images at CXP-6 speeds with four connections only.
PoCXP
A frame grabber that supports PoCXP is required providing the camera with
required power as per the specifications. Each connection supports up to 13 W.
i
i
