Specifications
26
Bonito PRO Technical Manual V1.0.0
Notes on specifications
Resolution and ROI frame rate
Resolution and ROI frame rate is listed after the specification table. The resulting
frame rate from changing sensor height from full image to 16 lines. Unless
otherwise noted, sensors do not give an increase in readout speed with a
reduction in width. However, in cases where a camera is limited by frame rate due
to bandwidth restrictions, a reduction in width gives a frame rate increase.
Absolute quantum efficiency plots
Dimensions and mass
Dimensions include connectors and default lens mount (F-Mount) but not the
tripod and lens.
Mass does not include the tripod and lens.
Both dimensions and mass values in the specification tables are for the default
configuration of the camera (default housing and lens mount).
Modular options
Bonito PRO cameras can be ordered with several modular options including lens
mount and optical filter options. For more information, see the
Modular Concept
.
NOTICE
Monochrome and NIR models
As monochrome and NIR models do not have an optical filter always attach a dust
cap when a lens is not attached to minimize the possibility of contaminants falling
on the sensor surface.
Frame rate and readout
Although the sensor is capable of higher frame rates, readout is limited by
bandwidth and exposure value. You can improve frame rates with a reduced
region of interest and shorter exposure values.
Important notice before reading the specifications tables
All measurements were done without protection glass or IR cut filter. With
protection glass or filters, QE decreases by approximately 10%.
The uncertainty in measurement of the QE values is
10.25%. This is mainly due
to uncertainties in the measuring apparatus itself (Ulbricht sphere, optometer).
Manufacturing tolerance of the sensor increases overall uncertainty.
