Camera interfaces
54
Bonito PRO Technical Manual V1.0.0
Status LEDs
The color and state of the LEDs has the following meaning.
State
Indication
No power
Off
System booting
Solid orange
Powered, but not connected (not applicable
to a device reliant on PoCXP power)
Slow pulse (1 Hz) red
Connection detection in progress, PoCXP
active
Fast flash (12.5 Hz) alternate green and orange, shown
for a minimum of one second even if the connection
detection is faster
Connection detection in progress, PoCXP not
in use
Fast flash (12.5 Hz) orange, shown for a minimum of
one second even if the connection detection is faster
Device or host incompatible, PoCXP active
Slow flash (0.5 Hz) alternate red and green
Device or host incompatible, PoCXP not in use
Slow flash (0.5 Hz) alternate red and orange
Device or host connected, but no data being
transferred
Solid green
Device or host connected, waiting for event
(for example trigger, exposure pulse)
Slow pulse (1 Hz) orange
Device or host connected, data being
transferred
Fast flash (12.5 Hz) green
Error during data transfer (for example CRC
error, single bit error detected)
500 ms red pulse In case of multiple errors, there shall
be at least two green fast flash pulses before the next
error is indicated
Connection test packets being sent
Slow flash (0.5 Hz) alternate green and orange
Compliance test mode enabled
Slow flash (0.5 Hz) alternate red then green then
orange
System error (for example internal error)
Fast flash (12.5 Hz) red
Table 16: Status of LEDs
