Description of the data path
PIKE Technical Manual
V5.0.0
180
Color correction
Why color correction?
The spectral response of a CCD is different of those of an output device or
the human eye. This is the reason for the fact that perfect color reproduction
is not possible. In each PIKE camera there is a factory setting for the color
correction coefficients, see Chapter
Color correction is needed to eliminate the overlap in the color channels. This
overlap is caused by the fact that:
•
Blue light:
is seen by the red and green pixels on the CCD
•
Red light:
is seen by the blue and green pixels on the CCD
•
Green light:
is seen by the red and blue pixels on the CCD
The color correction matrix subtracts out this overlap.
Color correction in AVT cameras
In AVT cameras the color correction is realized as an additional step in the
process from the sensor data to color output.
Color correction is used to harmonize colors for the human eye. With other
AVT (color) cameras so far, you had the opportunity to use it or to switch it
off.
Pike cameras introduce for the first time the so-called color correction
matrix. This means: you are now able to manipulate the color-correction
coefficients yourself.
Color correction: formula
Before converting to the YUV format, color correction on all color models is
carried out after BAYER demosaicing via a matrix as follows:
GretagMacbeth ColorChecker
Sensor-specific coefficients C
xy
are scientifically generated to ensure that
GretagMacbeth™ ColorChecker®-colors are displayed with highest color fidel-
ity and color balance.
These coefficients are stored in user set 0 and can not be overwritten (factory
setting).
Formula 4: Color correction
red*
Crr
red
Cgr
green
Cbr
blue
+
+
=
green*
Crg
red
Cgg
green
Cbg
blue
+
+
=
blue*
Crb
red
Cgb
green
Cbb
blue
+
+
=
