Description of the data path
PIKE Technical Manual
V5.0.0
127
•
Only following cameras: Pike F-032/Pike F-210/Pike F-421/Pike F-505/
Pike F-1100/Pike F-1600
•
PIKE camera with defocused lens
•
PIKE color cameras set to RAW8 or RAW16 (debayering: none)
•
In case of using AOI, be aware that the middle vertical line (+/- 20
pixel) is part of the AOI.
•
First do offset adjustment, then do gain adjustment.
To carry out an adjustment (offset adju gain adjustment) in
SmartView, perform the following steps:
1.
In SmartView click
Extras
Adjust channels...
or use
Alt+Ctrl+A
.
The following window opens:
2.
Put on lens cap.
3.
Set gain adjustment slider and offset adjustment slider to 0.
4.
Click several times
Offset adjustment
until the slider does not move
any more.
5.
Put off lens cap.
6.
Take test sheet with vertical continuous b/w gradient, defocus lens and
start image acquisition.
7.
Activate
Gain auto adjustment
.
Now left and right channel should be adjusted for all grey values, so
that vertical line is no more visible.
Figure 68: SmartView: channel adjustment (gain+offset) (1.10 and greater)