Specifications
PIKE Technical Manual
V5.0.0
82
PIKE F-145B/C (fiber) (-15fps*)
* Variant: F-145-15fps only
This variant offers lower speed (only 15 fps), but better image quality.
Feature
Specification
Image device
Type 2/3 (diag. 11.2 mm) type progressive scan SONY ICX285AL/AQ
with EXview HAD microlens
Effective chip size
9.0 mm x 6.7 mm
Cell size
6.45 µm x 6.45 µm
Picture size (max.)
1388 x 1038 pixels (Format_7 Mode_0)
Lens mount
Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
mechanical flange back to filter distance: 12.5 mm
(see
Figure 22: Pike C-Mount dimensions (large filter)
ADC
14 bit
Color modes
Only color:
Raw8, Raw12, Raw16, Mono8, YUV422, YUV411, RGB8
Frame rates
1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps (* Variant: F-145-15fps
only up to 15 fps)
up to 30 (16*) fps in Format_7 (Mono8/12 no sub-sampling)
Gain control
Manual: 0-32
dB (0.0358
dB/step); auto gain (select. AOI)
Shutter speed
39 (71*)
µs … 67,108,864 µs (~67s); auto shutter (select. AOI)
External trigger shutter
Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Internal FIFO memory
Up to 22 frames
Look-up tables
16 user-defined (14 bit
14 bit); gamma (0.45 and 0.7)
Smart functions
AGC (auto gain control), AEC (auto exposure control), real-time
shading correction, LUT, 64 MByte image memory, mirror, binning,
sub-sampling, High SNR, storable user sets
only color:
AWB (auto white balance), color correction, hue, satu-
ration, sharpness
Two configurable inputs, four configurable outputs
RS-232 port (serial port, IIDC V1.31)
Transfer rate
100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Digital interface
IEEE 1394b (IIDC V1.31), 2 x copper connectors (bilingual) (daisy
chain)
fiber
: IEEE 1394b, 2 connectors: 1 x copper (bilingual), 1 x GOF
connector (2 x optical fiber on LCLC), (daisy chain)
Power requirements
DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE
Power consumption
Typical 5 watt (@ 12 V DC);
fiber:
typical 5.75 watt (@ 12 V DC)
Table 17: Specification PIKE F-145B/C (fiber)