28
Rapier Series Switch
C613-03020-00 REV K
3.
Install the replacement air filter in the fan-only module.
Insert the air filter into the narrow slot between the faceplate of the FOM
and the fan. Position the air filter with the plastic frame towards the fan,
the quadrafoam towards the faceplate, and the flextab to the top. The air
filter should fit snugly.
4.
Re-install the fan-only module.
Keep the FOM in straight alignment and insert it slowly. Forcing a misaligned
FOM is likely to damage both the chassis and FOM.
Slowly and carefully slide the FOM into the cage, making sure that the air
filter and the flextab are clear of any contact points.
Firmly press the FOM until the faceplate engages, or nearly engages, the
chassis.
5.
Secure the fan-only module.
Tighten the two captive screws on the faceplate of the FOM.
