Hardware Reference
27
C613-03020-00 REV K
4.
Install the replacement fan-only module.
Keep the FOM in straight alignment and insert it slowly. Forcing a misaligned
FOM is likely to damage both the chassis and FOM.
Slowly and carefully slide the replacement FOM into the cage, making sure
that the air filter and the flextab are clear of any contact points.
Firmly press the FOM until the faceplate engages, or nearly engages, the
chassis.
5.
Secure the fan-only module.
Tighten the two captive screws on the faceplate of the FOM.
To replace an air filter
1.
Remove the current fan-only module from the switch.
Using a flat screwdriver, loosen the captive screws on the faceplate of the
FOM, and slide the FOM out of its cage. The internal power connection is
quite solid so pull firmly on the captive screws.
2.
Remove the existing fan filter by grasping the flextab at the top and pulling
upwards.