802.1p Default Priority
The Switch allows the assignment of a default 802.1p priority to each port on the Switch. In the
Configuration
folder open the
QoS
folder and click
802.1p
Default Priority
, to view the screen shown below.
Figure 6- 52. Port Default Priority Assignment and The Port Priority Table window
This page allows you to assign a default 802.1p priority to any given port on the Switch.The priority queues are numbered from 0, the lowest priority, to 7, the
highest priority.To implement a new default priority, choose the Switch of the Switch stack to be configured by using the
Unit
pull-down menu, choose a port
range by using the
From
and
To
pull-down menus and then insert a priority value, from 0-7 in the
Priority
field. Click
Apply
to implement your settings.
802.1p User Priority
The AT-9724TS allows the assignment of classes of service to each of the 802.1p priorities. In the
Configuration
folder open the
QoS
folder and click
802.1p User Priority
, to view the screen shown below.
Figure 6- 53. User Priority Configuration window
70
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
