Allied Telesis AT-9724TS Скачать руководство пользователя страница 178

Страница: 178 / 197

BadAuthenticators

The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes

received from this server.

PendingRequests

The number of RADIUS Access-Request packets destined for this server that have not yet timed out or

received a response.This variable is incremented when an Access-Request is sent and decremented due to

receipt of an Access-Accept,Access-Reject or Access-Challenge, a timeout or retransmission.

Timeouts

The number of authentication timeouts to this server.After a timeout the client may retry to the same server,

send to a different server, or give up.A retry to the same server is counted as a retransmit as well as a timeout.

A send to a different server is counted as a Request as well as a timeout.

UnknownTypes

The number of RADIUS packets of unknown type which were received from this server on the authentication

port

PacketsDropped

The number of RADIUS packets of which were received from this server on the authentication port and

dropped for some other reason.

RADIUS Accounting

This window shows managed objects used for managing RADIUS accounting clients, and the current statistics associated with them. It has one row for each

RADIUS authentication server that the client shares a secret with.To view the

RADIUS Accounting

, click

Monitoring > Port Access Control >

RADIUS Accounting

Figure 9- 28. RADIUS Accounting window

The user may also select the desired time interval to update the statistics, between

and

60s

, where “s” stands for seconds.The default value is one second.To

clear the current statistics shown, click the

Clear

button in the top left hand corner.

The following fields can be viewed:

Parameter

Description

ServerIndex

The identification number assigned to each RADIUS Accounting server that the client shares a secret with.

InvalidServerAddr

The number of RADIUS Accounting-Response packets received from unknown addresses.

Identifier

The NAS-Identifier of the RADIUS accounting client. (This is not necessarily the same as sysName in MIB II.)

ServerAddress

The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.

ServerPortNumber

The UDP port the client is using to send requests to this server.

RoundTripTime

The time interval between the most recent Accounting-Response and the Accounting-Request that matched it

from this RADIUS accounting server.

Requests

The number of RADIUS Accounting-Request packets sent.This does not include retransmissions.

Retransmissions

The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server.

Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in

which they remain the same.

Responses

The number of RADIUS packets received on the accounting port from this server.

MalformedResponses

The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets

include packets with an invalid length. Bad authenticators and unknown types are not included as malformed

accounting responses.

BadAuthenticators

The number of RADIUS Accounting-Response packets, which contained invalid authenticators, received from

this server.

PendingRequests

The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or

received a response.This variable is incremented when an Accounting-Request is sent and decremented due to

receipt of an Accounting-Response, a timeout or a retransmission.

Timeouts

The number of accounting timeouts to this server.After a timeout the client may retry to the same server, send

to a different server, or give up.A retry to the same server is counted as a retransmit as well as a timeout.A

send to a different server is counted as an Accounting-Request as well as a timeout.

UnknownTypes

The number of RADIUS packets of unknown type which were received from this server on the accounting

port.

PacketsDropped

The number of RADIUS packets, which were received from this server on the accounting port and dropped for

some other reason.

177

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch

Содержание AT-9724TS






































































































































































































Результаты поиска

Содержание AT-9724TS

Отзывы:

Похожие инструкции для AT-9724TS

Бренды по названию

Популярные бренды

Allied Telesis AT-9724TS, Инструкция по установке и эксплуатации

Результаты поиска

Содержание AT-9724TS

Отзывы:

Похожие инструкции для AT-9724TS

Бренды по названию

Популярные бренды