Alliant Networks CGW101, Руководство пользователя

Страница: 43 / 83

Using the Web Configuration Interface Basic
43
the inside Ethernet (eth0) and the outside cellular routing (cell0) interfaces. These features
should not be confused with layer 2 features found on the
Link pages.
Basic
From the Network page, click Basic . The following table describes the basic network
properties.
When you are finished, click Change .
Setting Description
Device name Specify a name to identify the device.
Device location Specify the real-world location of the device.
DHCP client Click Obtain an IP address from a DHCP Server to enable the DHCP client
feature. Click Specify IP information below to specify a static IP address.
IP address Specify static IP information for this device. If you change the IP address
information and click
Change , you cannot continue to configure the device using
the old IP address. The browser will lose connection. To reestablish a
connection, enter the new IP address into the browser:
Subnet mask Specify the subnet mask for this device.
Gateway Specify the IP address of the Gateway for this device. To specify that this
device’s cellular link will be the Gateway, use the keyword cell0.
Primary DNS Specify the IP address of a DNS server for this device. To indicate that you want
to use the Primary DNS retrieve from the cellular link use the keyword cell0.
Secondary DNS Specify the IP address of a secondary DNS server for this device. To indicate
that you want to use the Secondary DNS retrieve from the cellular link use the
keyword cell0.