Alliant Networks CGW101, Руководство пользователя

Страница: 63 / 83

Using the Web Configuration Interface Hardware settings
63
Hardware settings
From the M2M page, click Hardware settings . The Serial Passthrough:Hardware Settings
page appears, where you can configure hardware settings for the serial port.
Setting Description
Enable on reboot Click on to specify that the passthrough application should restart itself when a
disconnection occurs. Otherwise, click off. This overrides the Serial CLI’s enable
on reboot.
Socket type Sets the socket type to use for the passthrough application:
TCP listen : A socket that accepts connections from remote systems.
TCP connect : A TCP socket that initiates a connection with a remote system.
UDP : A UDP socket type.
Local port Specify the local port number for use with UDP and TCP-Listen modes.
Remote IP address Specify the IP address of the remote system that will be communicating with the
serial interface.
Remote port Specify the port number of the remote system that will be communicating with
the serial interface.
Network Timeout Specify the length of time to wait (in milliseconds) for data from the network
before automatically disconnecting.
Serial Timeout Specify the length of time to wait (in milliseconds) for data from the serial device
before sending it to the socket.
Line length Specify the length of the serial input buffer, defining how many characters will be
read from the serial port before sending the data to the socket.
Start and Stop buttons Start or stop the Serial Passthrough feature.