Alliant Networks CGW101, Руководство пользователя

Страница: 51 / 83

Using the Web Configuration Interface SNMP
51
SNMP
From the System page, click SNMP . This page allows you to
configure SNMP settings.
Simple Network Management Protocol (SNMP) is the standard for device management.
This device supports SNMP versions V1, V2c, and V3. SNMP V2c adds additional error
reporting over V1; V3 adds security via password-based authentication and encryption. The
use of V3 is required for any write actions (and for most read actions) by default. While it
may be disabled, the use of SNMP V3 is recommended. (For more information on SNMP,
see the
Advanced Operations Guide .)
When you are finished, click Change .
Setting Description
Enable Click to specify whether SNMPis enabled (on) or disabled (off).
Read community string Specify the community string used for accessing the public read-only MIBs.
Write community string Specify the community string used for accessing all of the MIBs with the ability to
write to the writable MIBs.
Require V3 Choose ON to specify that SNMP V3 is required to access the write community
MIBs (recommended).
Enable authentication traps Click to specify whether or not SNMP Authentication traps are enabled (on) or
disabled (off). Traps can be enabled on a primary and a secondary server. The
following fields can be configured for each server:
Community : Sets the community string used for authenticating trap events to
the server.
IP Address : Sets the IP address of the trap server to send trap events.
Port : Sets the destination port used for sending traps (the UDP port on the trap
server).