Alliant Networks CGW101, Руководство пользователя

Страница: 38 / 83

Installation Using the Discovery Tool
38
After about 60 seconds, you should be able to browse the Internet.
Using the Discovery Tool
Selecting maximum or custom will install the Alliant Discovery Tool. The Discovery Tool
helps you find and configure the gateway. This tool is usually only needed when installing
the gateway in a corporate environment, the gateway has already been configured and the
IP information is unknown or on a non 192.168.X.X subnet.
1. To install the Alliant Networks Discovery Tool select custom or maximum installation.
During the installation you will be prompted to install Java as well.
2. Start the discovery tool, select the gateway, and right-click to launch the configuration. (If
a password is set on the gateway, enter it when prompted. The default user name is
admin and the default password is public.) The configurable items are described in
Using
the Web Configuration Interface on page 39.
3. To launch the Alliant Discovery Tool
Under start, Programs, Alliant, CG 1000, select Discovery Tool.
The Discovery Tool window appears.
4. Select the Discovery Devices button. The gateway should appear below.
5. Right mouse-click and select browser(user) to launch you web browser. Now you can
use the Web interface to configure the device, see Using the Web Configuration
Interface on page 39.
After you change and save the configuration, disconnect the gateway from the computer
and connect it in its permanent place in the network. If you have difficulty discovering the
device connect your computer directly to the gateway with the supplied Ethernet cable.