Alliant Networks CGW101, Руководство пользователя, Страница: 39 / 83

Using the Web Configuration Interface Launching a gateway configuration
39
Using the Web Configuration Interface
If the configuration that was set at the factory does not meet your network requirements, or if
you want to customize the settings, you can use the Alliant Networks Web Configuration
Interface to change the configuration.
Launching a gateway configuration
You can only configure gateways that are on the same subnet as your computer. The
installation instructions assume that your computer is configured to acquire its IP address
from a DHCP server. This guarantees that your computer and the gateway have the same
IP information, because when it is connected to the gateway, your computer acquires its IP
information from the gateway. If your network does not allow this situation, the Alliant
Discovery Tool can help you find and configure the gateway.
The two ways to launch a gateway configuration are described below.
Direct browser access
Make sure that the gateway is either wired to the same network, associating with the same
wireless network, or connected directly to the computer, and that the gateway is connected
to power.
If you know that the gateway is on the same subnet as your computer, and you know the
gateway IP address, enter the IP address in your browser address pane. (The factory
default IP address is 192.168.0.1.) The gateway Web configuration start page appears in
your browser window. (The default user name is admin and the default password is
password.)