Alliant Networks CGW101, Руководство пользователя

Страница: 47 / 83

Using the Web Configuration Interface System
47
System
From the start page, click System . These pages allow you to perform administrative tasks.
Web
From the System page, click Web . This page allows you to control the device web server.
When you are finished, click Change .
Setting Description
Status Specify whether NAT should be enabled or disabled. If NAT is disabled, only one
computer can use the cellular link.
Maximum connections Specify the total number of connections allowed from inside computers through
the cellular link. This is not the number of computers allowed to access the
Internet; a computer generates several connections. Up to 1024 connections are
allowed.
Translation timeout Specify the length of time communication can be idle before a NAT connection is
closed, allowing internal resources to be reclaimed. This timeout value should be
increased if traffic is extremely intermittent.
Setting Description
Enable Click to specify whether the web server is enabled or disabled. If on, you can
configure the device through a web browser. If off, you can only configure the
device through Serial CLI, Telnet CLI, or SNMP.