manualshive.com logo in svg

Alliant Networks CGW101, Руководство пользователя, Страница: 24 / 83

Поделиться
Скачать
Alliant Networks CGW101 Скачать руководство пользователя страница 24

Introduction

DNS proxy

24

DNS proxy

DNS proxy allows the device to handle and forward DNS requests to remote DNS servers. 
This allows inside clients to use convenient naming such as www.alliantnetworks.com when 
addressing remote computers.

Backup and restore

The gateway provides a means of backing up and restoring its configuration via TFTP. It is 
prudent to back up the gateway configuration before altering functionality. 

Firmware upgrade

From time to time new firmware with improvements to gateway functionality becomes 
available. The gateway provides a means of upgrading firmware via TFTP.

Advanced operations features

SNMP

You can configure and manage the gateway through the Simple Network Management 
Protocol (SNMP) using any MIB browser. Parameters are stored in MIBs (Management 
Information Base), which provide a standard format for accessing data of various types. The 
gateway supports versions 1, 2c, and 3 of the SNMP protocol. SNMP V2c adds additional 
error status reporting over SNMP V1, while SNMP V3 adds secure authentication and 
encryption for reading and writing MIBs. For more information, see the 

Advanced 

Operations Guide

.

Содержание CGW101




















































































Отзывы:

Нет отзывов