14
53264
Section 3 Troubleshooting
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
13. TIMER DOES NOT ADVANCE IN AUTOMATIC CYCLE
POSSIBLE CAUSE
TO CORRECT
Inoperative high or low thermostat.
• Test thermostat and replace if inoperative.
Heating element does not heat or burner does not
ignite.
• Refer to Paragraph 5.
Heating element or burner cycles off prematurely.
• Refer to Paragraph 9.
Timer improperly set in FLUFF.
• Reset timer.
Broken, loose or incorrect wiring.
• Refer to appropriate wiring diagram.
