Allen-Bradley PLC-5 MAP/OSI Скачать руководство пользователя страница 119

Страница: 119 / 135

Communication Layers' Attributes

Appendix D

D-13

MAC Layer

Parameter:

Description:

Default Value:

Maximum inter-solicit

count

How often the station opens response window.

40 (Hex) 64 (Decimal)

Slot time

Maximum time (in octets) the node will wait for a

response. All nodes on the network must have

the same slot time.

50 (Hex) 80 (Decimal)

Maximum PDU size

Maximum size of PDU.

1FEB (Hex) 8171 (Decimal)

Maximum non-RWR

retry limit

Maximum retries of a non-RWR message.

3 (Decimal)

In Ring Desired

When set to zero, the node will only "go online"

to transmit.

MAC-Layer Counters:

Description:

Successor

The source address of the node to which this node will pass the token.

Predecessor

The source address of the node which passed the token to this node.

Last token rotation time

A measure of the time in octets of the last complete token pass as seen by this

node.

Frame checksum errors

Number of IEEE 802.4 CRC errors.

Number of tokens heard

Number of detected tokens being passed.

Number of who follows

query

Number of times this station has had to look for a new successor.

Token pass failures

Number of times this station has failed to pass the token.

Number of successors

Number of times this station failed to find a successor.

Unexpected frames

A possible duplicate token situation.

Claim tokens

Number of claim tokens found.

Received frames too long

Number of frames this station has received that are greater than 8K bytes.

Modem errors

Number of local physical errors from modem.

E-Bit errors

Number of frames with checksum errors detected by a remodulator.

Non-silence

Number of non-silence periods received from modem.

Frame fragments

Number of frames seen with a start delimiter and no end delimiter.

Solicit Any

Number of times frame soliciting all potential successors has been sent.

MAC-Layer Actions:

Description:

Go off line

The node removes itself from the network.

Go on line

The node will attempt to enter the network on the next available opportunity.

AB Parts

Содержание PLC-5 MAP/OSI








































































































































Результаты поиска

Содержание PLC-5 MAP/OSI

Отзывы:

Allen-Bradley PLC-5 MAP/OSI, Руководство пользователя, Страница: 119 / 135

Результаты поиска

Содержание PLC-5 MAP/OSI

Отзывы: