Allen-Bradley PLC-5 MAP/OSI Скачать руководство пользователя страница 114

Страница: 114 / 135

Communication Layers' Attributes

Appendix D

D-8

Session-Layer Counters:

Description:

Refuse SPDU Sent No Reason

The number of times this session entity sent a

S-CONNECT.response (reject) event with a provider reason

member indicating no reason given.

Refuse SPDU Received Permanent

The number of times this session entity received a

S-CONNECT.confirm (reject) event with a provider reason

member indicating SSAP indentifier unknown or proposed

protocol version(s) not supported.

Refuse SPDU Sent Permanent

The number of times this session entity sent a

S-CONNECT.response (reject) event with a provider reason

member indicating SSAP indentifier unknown or proposed

protocol version(s) not supported.

Refuse SPDU Received Temporary

A count of the number of times this session entity received a

S-CONNECT.confirm (reject) event with a provider reason

member indicating session service user (presentation layer) is

not attached to the SSAP or congestion at connection time.

Abort SPDU Received No Reason

The number of times this session entity received a

S-P-ABORT.request event with a reason indicating

unspecified.

Abort SPDU Sent No Reason

The number of times this session entity sent a

S-P-ABORT.request event with a reason indicating

unspecified.

Abort Sent Protocol Error

The number of times this session entity sent a S-P

ABORT.request event with a reason indicating protocol errors.

Current session buffer usage

This is a count of the number of buffers the session layer is

using.

Highest level of session buffer usage

This is a measure of the maximum value that the counter listed

above has reached.

The following table lists the Transport–Layer attributes for the OSI
coprocessor.

Transport-Layer Parameters:

Description:

Inactivity Time

An integer that specifies the maximum time that may pass

before a transmitted TPDU is received by the peer transport

entity. If a TPDU is not received within this time, transport

closes the connection.

Local Retransmission Time

An integer that specifies the maximum time that this transport

entity will wait for an acknowledgement of a previously

transmitted TPDU.

Maximum Number of Retransmissions

An integer that specifies the maximum number of times that

this transport entity will retransmit a TPDU without receiving an

acknowledgement (assuming the TPDU requires an

acknowledgement).

Connect Request Congestion Limit

A threshold level on the Connect Request Congestion counter.

Connect Request Configuration Err. Det.

Limit

A threshold level on the Connect Request Configuration Error

counter.

Connect Request Refused Configuration

Error Limit

A threshold level on the Connect Request Refused

Configuration Error counter.

Transport-Layer Attributes

Содержание PLC-5 MAP/OSI








































































































































Результаты поиска

Содержание PLC-5 MAP/OSI

Отзывы:

Allen-Bradley PLC-5 MAP/OSI, Руководство пользователя, Страница: 114 / 135

Результаты поиска

Содержание PLC-5 MAP/OSI

Отзывы: