Allen-Bradley PLC-5 MAP/OSI Скачать руководство пользователя страница 116

Страница: 116 / 135

Communication Layers' Attributes

Appendix D

D-10

Transport-Layer Counters:

Description:

Open Connections

The number of connections open at the transport layer.

Current free transport buffers

This is a count of the number of buffers that are available for

use by the transport layer.

Lowest level of free transport buffer

This is the minimum value that the counter listed above has

reached.

The following table lists the Network–Layer attributes for the OSI
coprocessor.

Network-Layer Parameters:

Description:

Lifetime

An integer that specifies the maximum time that may elapse

before a transmitted NPDU is delivered to its destination.

Discard NPDU General Limit

A threshold level on the Discard NPDU General counter.

Discard NPDU Congestion Limit

A threshold level on the Discard NPDU Congestion counter.

Discard NPDU Address Limit

A threshold level on the Discard NPDU Address counter.

Discard NPDU Lifetime Exceeded Limit

A threshold level on the Discard NPDU Lifetime Exceeded

counter.

Discard NPDU Unsupported Option Limit

A threshold level on the Discard NPDU Unsupported Option

counter.

Discard NPDU Reassembly Limit

A threshold level on the Discard NPDU Reassembly counter.

Checksum

An integer that specifies the usage of the optional checksum in

a NPDU header. A value of 0 is interpreted as Checksum

disabled

A value of 1 is interpreted as Checksum

enabled.

Configuration Timer

This timer determines how often an End System Hello (ESH)

PDU is sent from this network entity. The units are in seconds.

Redirection Timer

This timer value is placed into a Redirect (RD) PDU as the hold

timer, to ensure that bad or unused routing information is not

stored forever (units are in seconds).

Network-Layer Counters:

Description:

Discard NPDU General

A count of the number of NPDU's discarded for ``general"

reasons. General reasons include an unspecified reason,

protocol procedure error, incorrect checksum, header syntax

error, incomplete NPDU received, and duplicate option

specified.

Discard NPDU Congestion

A count of the number of NPDU's discarded because of media

congestion.

Discard NPDU Address

A count of the number of NPDU's discarded because of an

unknown or inaccessible address.

Discard NPDU Lifetime Exceeded

A count of the number of NPDU's discarded because its

lifetime expired.

Discard NPDU Unsupported Option

A count of the number of NPDU's discarded because it is not

fully supported.

Discard NPDU Reassembly

A count of the number of NPDU's discarded because of some

reassembly problem.

Network-Layer Attributes

Содержание PLC-5 MAP/OSI








































































































































Результаты поиска

Содержание PLC-5 MAP/OSI

Отзывы:

Allen-Bradley PLC-5 MAP/OSI, Руководство пользователя, Страница: 116 / 135

Результаты поиска

Содержание PLC-5 MAP/OSI

Отзывы: