Allen-Bradley AADvance, Руководство пользователя

Страница: 91 / 169

Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018 91
Install the AADvance System Chapter 5
2. Mount the T9100 processor base unit
• Place the T9100 processor base unit onto the DIN rails and
position it towards the left, leaving space for the T9300 I/O base
units to the right.
• Secure the processor base unit onto the DIN rails by sliding the
retaining lever (below the base unit) to the left.
3. Mount each T9300 I/O base unit
• Place a T9300 I/O base unit onto the DIN rails to the right of the
T9100 processor base unit.
• Slide the I/O base unit to the left until the joining connectors are
fully mated.
• Insert the retaining clips at the top and bottom of the base units .
• Secure the I/O base unit onto the DIN rails by sliding the retaining
lever (below the base unit) to the left. Then insert the backplane
clips into the top and the bottom slots.
4. Mount end stops onto DIN rails .
• Install two end stops onto the upper DIN rail , one at each end of
the assembly.