Allen-Bradley AADvance, Руководство пользователя

Страница: 37 / 169

Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018 37
The AADvance Safety Controller Chapter 2
Importing and Exporting Data
The AADvance Workbench can import and export existing data in standard
file formats such as Microsoft Excel.
AADvance Workbench Licensing
The AADvance Workbench is licensed software. There are three types of
license: full, single controller and demo.
• The single controller license is applicable for applications which use only
one controller. The software features which add a second or subsequent
controller to the project are disabled, and you cannot open an existing
project which uses more than one controller.
• The full license supplies all of the features of the AADvance
Workbench. It is applicable for applications with one or more
controllers.
• The demo license is a like a full license, but with a time limit. You can use
all of the features of the AADvance Workbench for up to 30 days after
first running the AADvance Workbench is first run.
A demo license is supplied free of charge for a first installation on a computer.
You change the demo license to a single controller license or a full license by
purchasing an unlock code from Rockwell Automation, and entering the code
into the software. When you use the demo license, the AADvance Workbench
displays a Demo License window each time you try to open a project. The
window includes the contact details at Rockwell Automation required for
purchasing a license.
If you try to use the demo license for more than 30 days, the license expires. You
cannot open a project or create a new one until you purchase a license.
Corrective Maintenance and Module Replacement
Scheduled maintenance consists of checking the I/O Module calibrations and
proof tests. Detailed scheduled and corrective maintenance information is
given in the AADvance Troubleshooting and Maintenance Manual Doc No:
ICSTT-RM406 . Corrective maintenance is by module replacement and where
required fuse replacement in Termination Assemblies. In dual and triple
modular redundant configurations, you can remove a module and install a new
one without interrupting the system operation. In simplex configurations
removing a module will interrupt the system operation. However, certain
restrictions apply on module replacement timing for Safety Related systems
(see the AADvance Safety Manual -
ICSTT-RM446 for guidance).
Field connection wiring is attached at the connectors on the termination
assemblies. Ethernet and Serial data connections are made at the T9100
Processor Base Unit. There are no physical links needed to be set up on any