Allen-Bradley AADvance, Руководство пользователя

Страница: 128 / 169

128 Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
Chapter 5 Install the AADvance System
• Install the cable to the plug assembly and tighten the retaining screws
by hand.
2. Connect the free end of the expansion cable to the left hand plug of an
I/O base unit using a cable socket assembly.
• Insert a cable socket assembly into the left hand connector of the T9300
processor base unit.
• Secure the socket assembly by inserting the two M3 socket cap screws.
• Tighten the screws with a 2.5 mm Allen key.
• Install the cable to the socket assembly and tighten the retaining screws
by hand.
Fault Reporting Reference
Information Each module has a set of front panel status indicators. The function and
meaning of these indicators related to each module is as follows:
Status Indicators on the 94xx Series Input and Output Module
Table 10 - Status Indicators on the 94xx Series Input and Output Module
Indicator Status Description
Healthy OFF No power.
GREEN No module faults present.
RED The module has one or more faults.
• The Healthy indicator can turn RED immediately after power is applied to the
module, before then turning GREEN
• If Healthy is GREEN and the Ready and Run are RED then the module is said to
be in its "shutdown state" refer to the Troubleshooting Manual - Chapter 3 for
more information on the shutdown state.
Ready OFF No power or module is unlocked.
GREEN Locked and prepared to report channel values.
RED Locked but not prepared to report channel values.