manualshive.com logo in svg

Allen-Bradley 5069-IA16, Руководство пользователя

Поделиться
Скачать
Allen-Bradley 5069-IA16 Скачать руководство пользователя страница 47

Rockwell Automation Publication 5069-UM004A-EN-P - April 2019

47

Digital Module Operation in a Control System

   Chapter 1

Output Mode Available with Compact 5000 I/O Safety Input Module

The Module Definition for the 5069-OBV8S or 5069-OBV8SK safety output 
module includes the Output Mode parameter. This parameter defines whether 
the module is operating in Sourcing or Bipolar mode.

For more information on the Module Definition parameters that are available 
with Compact 5000 I/O digital modules, see the Logix Designer application.

Requested Packet Interval

The Requested Packet Interval (RPI) is a configurable parameter that defines a 
rate at which the owner-controller and the module exchange data.

You set the RPI value during initial module configuration and can adjust it as 
necessary after module operation has begun. The following are valid RPI 
values:

• Compact 5000 I/O standard modules - 0.2…750 ms
• Compact 5000 I/O safety modules - 2…500 ms

Connection Reaction Time Limit with Compact 5000 I/O Safety Modules

With Compact 5000 I/O safety modules, the Connection Reaction Time 
Limit configuration affects the module RPI.

The Connection Reaction Time Limit defines the predicted period of safety 
packets on the associated connection. If the Max Network Delay exceeds the 
Connection Reaction Time Limit, a connection fault occurs. 

IMPORTANT

If the Configured By parameter is External Means, the Output Mode 
parameter is disabled. It is automatically set to None.

IMPORTANT

You can change the RPI while the project is online. If you change the RPI 
while the project is online, however, the connection to the module is closed 
and reopened in one of the following ways:

• You inhibit the connection to the module, change the RPI value, and 

uninhibit the connection.

• You change the RPI value. In this case, the connection is closed and 

reopened immediately after you apply the change to the module 
configuration.

Содержание 5069-IA16









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды