Rockwell Automation Publication 22C-UM001J-EN-E - January 2017
107
Programming and Parameters
Chapter 3
d333 [Fault 7 Code]
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (
[Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 6 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d333 [Fault 7 Code]
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (
[Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 6 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d334 [Fault 8 Code]
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (
[Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 7 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d335 [Fault 9 Code]
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (
[Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 8 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d336 [Fault 10 Code]
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (
[Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 9 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d337 [Fault 4 Time-hr]
(With FRN 6.xx and later.)
Displays the value of the
[Elapsed Time-hr] parameter when the fault occurred.
Values
Default:
Read Only
Min/Max:
0/32767 Hr
Display:
1 Hr
Содержание 22C-B012N103
