Allegion SIMONS VOSS SmartHandle AX страница 47 Скачать руководство пользователя

Страница: 47 / 55

Manual
SmartHandle AX

47 / 55

SimonsVoss

13 | Disassembly

3. Use a slotted-head screwdriver to lever off the escutcheon covers.

4. Remove the escutcheon covers.

5. Pull off the handle from the opposite side to the sub-assembly.

6. Unfasten the sub-assembly attachment screws.

7. Pull out the sub-assembly with the spindle.

SmartHandle AX has been removed from the door.

8. Press the spindle securing pin inwards and pull the spindle out of the

sub-assembly.

9. Insert the hex key into the designated hole in the spindle hole.

10. Press the hex key towards the nearest edge (see quick guide for

details) and hold.

11. Remove the second handle from the sub-assembly.

SmartHandle AX is dismounted.

13.3 Variant A2

You require the following tools for disassembly:

–

TX-15 screwdriver

–

Slotted-head screwdriver

–

PH-2 screwdriver

–

1.5 mm hex key

1. Dismount electronic cylinders if necessary.

2. Unfasten the grub screws from both handles.

3. Use a slotted-head screwdriver to lever off the escutcheon covers.

4. Remove the escutcheon covers.

5. Pull off the handle from the opposite side to the sub-assembly.

6. Unfasten the sub-assembly attachment screws.

7. Pull out the sub-assembly with the spindle.

SmartHandle AX has been removed from the door.

8. Press the spindle securing pin inwards and pull the spindle out of the

sub-assembly.

9. Insert the hex key into the designated hole in the spindle hole.

10. Press the hex key towards the nearest edge (see quick guide for

details) and hold.

Содержание SIMONS VOSS SmartHandle AX
























































Результаты поиска

Содержание SIMONS VOSS SmartHandle AX

Отзывы:

Похожие инструкции для SIMONS VOSS SmartHandle AX

Бренды по названию

Популярные бренды

Allegion SIMONS VOSS SmartHandle AX, Руководство пользователя

Результаты поиска

Содержание SIMONS VOSS SmartHandle AX

Отзывы:

Похожие инструкции для SIMONS VOSS SmartHandle AX

Бренды по названию

Популярные бренды