Manual
SmartHandle AX
16 / 55
SimonsVoss
4 | Installation
IMPORTANT
X variant
If you have ordered the X version for very thick doors, your supply package
will include an extra-long spindle bar and threaded rods in addition to ex-
tension sleeves. The indicated length in this case refers to the extension
with a threaded rod. Use a saw to trim the screws and spindle bar.
Prepare inside
handle (DIN R)
Installation is different for each opening side (DIN R or DIN L).
1. Insert the switching plate as shown.
2. Position the spring sub-assembly at an angle to the escutcheon base
until it touches the switching plate.
3. Draw the spring sub-assembly back, so that the spring is compressed.
4. Slide the spring sub-assembly pawls into the escutcheon base.
5. Press the rear clip into the designated pawl.
ð
Spring contact is inserted.
Prepare inside
handle (DIN L)
Installation is different for each opening side (DIN R or DIN L).
1. Insert the switching plate as shown.
2. Position the spring sub-assembly at an angle to the escutcheon base
until it touches the switching plate.
3. Draw the spring sub-assembly back, so that the spring is compressed.
4. Slide the spring sub-assembly pawls into the escutcheon base.
5. Press the rear clip into the designated pawl.
ð
Spring contact is inserted.
Insert spindle
IMPORTANT
If you use a 7 mm spindle, attach the adapter shoe to the spindle before fit-
ting the spindle.