Manual
SmartHandle AX
24 / 55
SimonsVoss
4 | Installation
4.5.3 Procedure
Execute program-
ming
IMPORTANT
A large volume of data is transmitted during initial programming. You can
transfer data significantly faster and reduce the programming time if you
use a Smart CD.MP.
Fig. 7:
Programming active (SmartCD.G2)
Fig. 8:
Programming passive (SmartCD.MP)
ü
Locking device added in LSM software.
ü
LSM software launched.
ü
Programming device connected.
1. Position the programming device.
2. Programme the SmartHandle AX (see , quick guide or LSM manual for
details).
ð
SmartHandle AX is programmed.
Trim screws
Screw/spindle
Length
2× L1
T + 10 mm (± 3 mm)
2× L2
T + 3 mm (± 3 mm)
Spindle
T + 37 mm (± 4 mm)
1. Measure the thickness of the door (T).
