Manual
SmartHandle AX
13 / 55
SimonsVoss
4 | Installation
3. Fasten the escutcheon base onto the sub-assembly with the L2 screws.
IMPORTANT
If you use a 7 mm spindle, place the adapter sleeve on the free side of the
spindle.
4. Place the inner side handle on the spindle.
5. Fasten the handle onto the sub-assembly with the L1 screws.
IMPORTANT
Press the handle downwards if there is not enough room.
IMPORTANT
Fit dummy cylinder (FH only)
Push the dummy cylinder into the mortise lock through the fitted escut-
cheon base and fasten the dummy cylinder with a suitable screw.
6. Fasten the grub screw into the handle to affix it.
7. Slide the escutcheon along the handle and press the escutcheon onto
the escutcheon base until it locks into position.
8. Press the escutcheon onto the escutcheon base on the cylinder
opening until it locks into place.
9. Press the escutcheon onto the escutcheon base on the cylinder
opening on the other side until it locks into place.
ð
The sub-assembly is mounted.
Position outer
handle
1. Push the outer handle into the sub-assembly until the pin locks into the
spindle.
2. Fasten the grub screw into the handle to affix it.
ð
SmartHandle AX fitted.
4.3 Variant A1
4.3.1 Contents of packaging
Quantity
Object
1×
Outer fitting assembly, including:
4×
Battery (CR2450)
1×
Inlay
