Allegion SIMONS VOSS SmartHandle AX Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 55

Allegion SIMONS VOSS SmartHandle AX Скачать руководство пользователя страница 38

Manual
SmartHandle AX

38 / 55

SimonsVoss

7 | Operation

7 Operation

The SmartHandle AX can be operated in different ways, depending on the
programming.

IMPORTANT

Gap

The size of the gap affects the wireless connection.

1. If you use a transponder, you must position it between five and thirty

centimetres away.

2. If you use a passive medium, place it under the groove on the cover. If

there is no groove, position the identification medium on the
SimonsVoss inscription.

Pulse opening

To use pulse opening, ensure that the Flip Flop checkbox is disabled.

ü

Identification medium is authorised to use the SmartHandle AX.

1. Position the identification medium.

2. If you are using a transponder, press it once.

ð

SmartHandle AX will beep and flash green twice.

ð

The SmartHandle AX will remain open for the pre-set pulse interval.

Flip-flop mode

To use flip-flop mode, ensure that the Flip Flop checkbox is enabled.

ü

Identification medium is authorised to use the SmartHandle AX.

1. Position the identification medium.

2. If you are using a transponder, press it once.

ð

When the SmartHandle AX engages to open, it will beep and flash
(short-long).

ð

When SmartHandle AX is decoupled, it will beep and flash (long-
short).

ð

The SmartHandle AX will remain engaged to open or decoupled until it
is activated again.

«
...
36
37
38
39
40
...
»

Содержание SIMONS VOSS SmartHandle AX
























































Отзывы:

Нет отзывов