Alinco DJ-V57 Скачать руководство пользователя страница 42

Страница: 42 / 72

7.Special Functions

7. Special Functions

1. In the VFO/Memory/Call channel mode, select the channel to which you wish to

apply the Repeater-Access setting.

2. Press the FUNC key, and while

is displayed on the LCD, press the

key.

The Repeater-Access setting is applied to the operating frequency.

Reverse operation is possible by pressing the

key.

The repeater function releases temporary and you can transmit on the frequency

originally used for the repeater downlink while monitoring the uplink frequency.

Press

again to go back to the normal repeater mode.

The

icon flashes during the reverse operation.

This is a type of VFO scan, but by setting the frequency range of the VFO into PH and

PL channels, it only scans between those frequencies.

With setting the PH and PL properly, up to 3 Program scan ranges will be available.

1. Enter the Memory mode and set the PL and PH

frequency into the designated memory channels.

Refer to Memory setting for the proper sequence.

2. Return to VFO mode by pressing

key. Set

the VFO to the frequency within the range to be

program-scanned.

3. Press the

key to start scanning.During this

scan mode, "P" flashes after memory channel

display.

4. Press any key other than the MONI key to stop

scanning.

The Lowet band edge

The Highest band edge

Range (1)

(2)

(3)

Program Scan

7.2

NOTE:

Preset parameters on the Repeater-Access function memory will be effective at
any frequency. Repeater-Access parameters have priorities over the parameters
programmed in the VFO/memory/CALL modes.

Repeater-Access

7.1

Содержание DJ-V57









































































Результаты поиска

Содержание DJ-V57

Отзывы:

Бренды по названию

Популярные бренды

Alinco DJ-V57, Инструкция по эксплуатации

Результаты поиска

Содержание DJ-V57

Отзывы:

Бренды по названию

Популярные бренды