Alinco DJ-V57 Скачать руководство пользователя страница 16

Страница: 16 / 72

2.Accessories

Caution

• Risk of explosion, generation of heat or leak of chemicals inside if the

battery is replaced by an incorrect type. Use always the recommended

types of batteries in this manual only.

• The battery pack isn't fully charged when shipped. It must be charged

before use.

• Charging should be conducted in a temperature range of 0ºC to +40ºC

(+32ºF to +104ºF).

• Don't modify, dismantle, incinerate or immerse the battery pack in the water

as this can be dangerous.

• Never short-circuit the battery pack terminals, as this can cause damage to

the equipment or lead to heating of the battery which may cause burns.

• Unnecessary prolonged charging (overcharging) can deteriorate battery

performance.

• The battery pack should be stored in a dry place where temperature is in

-10ºC to +45ºC (-14ºF to +113ºF) range. Temperatures outside this range

can cause the battery liquid to leak. Exposure to prolonged high humidity

can cause corrosion of metal components.

• Battery-packs are a consuming part. When its operating time becomes

considerably short after a normal charge, please consider that the pack is

exhausted and replace it with a new one.

• The battery pack is recyclable. Check with your local waste officials for

details on recycling options or proper disposal in your area.

• Use specified genuine chargers only to charge battery packs. Use of other

chargers may cause damage to products, you and your property.

• Li-ion battery packs can't be charged using DC-jack on the unit (Only Ni-

MH battery packs can be charged).

• Even if you do not use the battery pack for a long time, charge it at least

once every three months to prevent deterioration.

Содержание DJ-V57









































































Результаты поиска

Содержание DJ-V57

Отзывы:

Бренды по названию

Популярные бренды

Alinco DJ-V57, Инструкция по эксплуатации

Результаты поиска

Содержание DJ-V57

Отзывы:

Бренды по названию

Популярные бренды