Alinco DJ-V57 Скачать руководство пользователя страница 17

Страница: 17 / 72

2.Accessories

Charging the Battery Pack Using DC-Jack on the Unit

The unit can charge the EBP-65 and EBP-66 optional Ni-MH battery packs by

supplying DC power through the DC-jack on the unit using EDC-146/147/148 wall

chargers or an optional DC power supply (DC 12V~DC 16V, 1A or more: IEC/EN

60950-1 compliant) and a DC cable such as EDC-37.

1. Attach the battery pack by referring to "Battery Pack" (page 15).

2. Connect the AC adapter plug to the DC-jack on the

unit then connect the charger's adapter to the wall

outlet.

* AC adapter may look different.

3. Turn on the unit and set the battery charge

parameters. (page 44)

* "Battery Type Setting"

Select BAT-NI+.

4. After completing the settings, a flashing

appears on the display. Make sure the icon is

flashing then turn off the unit. It takes about 10

hours/30hours for EBP-65/66 respectively to

complete the charge.

AC adapter plug

AC adapter*

■

NOTE:

• Please read the general safety instructions included in the optional accessories

to correctly and safely use them.

• EDC-146/147/148 can't be used as the adapter for operation. These adapters

are for charging purposes only.

• Chargers can't perform the correct charge when the AC voltage is unstable.
•

flashes even EBP-65/66 aren't attached. To avoid short-circuit, never

activate this function when the pack isn't attached to the unit.

• Li-ion battery packs can't be charged in this way.

Содержание DJ-V57









































































Результаты поиска

Содержание DJ-V57

Отзывы:

Бренды по названию

Популярные бренды

Alinco DJ-V57, Инструкция по эксплуатации

Результаты поиска

Содержание DJ-V57

Отзывы:

Бренды по названию

Популярные бренды