Replacing the graphics card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
Procedure
1
Align the graphics card with the PCI-Express card connector on the system
board.
2
Place the card in the connector and press down firmly. Ensure that the card
is firmly seated.
3
Replace the two screws (#6-32x6) that secure the graphics card to the
chassis.
4
Connect the power cables to the graphics card.
NOTE: The location of the power supply connector (PCIE1, PCIE2
and PCIE3) varies depending on the video card installed.
5
From outside the chassis, push the screw covers inside to cover the screws
that secure the graphics card to the chassis.
6
Connect the power cables to the graphics card.
Post-requisites
1
Replace the left and right side-panels. See “
”.
2
Replace the
.
74
Содержание Area-51 R3 Threadripper Edition
