BIOS setup program
Boot Sequence
Boot Sequence allows you to bypass the System Setup–defined boot device
order and boot directly to a specific device (for example: optical drive or hard
drive). During the Power-on Self Test (POST), when the Dell logo appears. you
can:
•
Access System Setup by pressing F2 key
•
Bring up the one-time boot menu by pressing F12 key
The one-time boot menu displays the devices that you can boot from including
the diagnostic option. The boot menu options are:
•
Removable Drive (if available)
•
STXXXX Drive
NOTE: XXX denotes the SATA drive number.
•
Optical Drive (if available)
•
Diagnostics
NOTE: Choosing Diagnostics, will display the ePSA diagnostics
screen.
The boot sequence screen also displays the option to access the System Setup
screen.
Navigation keys
NOTE: For most of the System Setup options, changes that you make
are recorded but do not take effect until you restart the system.
Keys
Navigation
Up arrow
Moves to the previous field.
Down arrow
Moves to the next field.
183
Содержание Area-51 R3 Threadripper Edition
