Table 7. System setup options—Boot menu
Boot
Boot Configuration
Wait for ‘F1’ If Error
Allows you to enable or disable the
F1 screen. Default: All, but KB.
Secure Boot Control
Allows you to enable or disable the
secure boot control. Default:
Disabled.
Load Legacy OPROM
Default: Enabled.
Set Boot Priority
Boot List Option
Allows you to select the boot list
option.
Default: Legacy
USB Boot Support
Allows you to enable or disable
USB Boot support. Default:
Enabled.
1st Boot
Allows you to enable or disable the
1st boot device. Default: Hard Disk.
2nd Boot
Allows you to enable or disable the
2nd boot device. Default: USB Hard
Disk.
3rd Boot
Allows you to enable or disable the
3rd boot device. Default: CD/DVD.
4th Boot
Allows you to enable or disable the
4th boot device. Default: Floppy.
5th Boot
Allows you to enable or disable the
5th boot device. Default: Network.
190
Содержание Area-51 R3 Threadripper Edition
