Alienware Area-51 R3 Threadripper Edition, Руководство по обслуживанию

Страница: 196 / 199

6 Boot to the USB drive from the One Time Boot Menu .
7 Type the BIOS setup program filename and press Enter .
8 The BIOS Update Utility appears. Follow the instructions on the screen to
complete the BIOS update.
Enhanced Pre-Boot System Assessment
(ePSA) diagnostics
The ePSA diagnostics (also known as system diagnostics) performs a complete
check of your hardware. The ePSA is embedded with the BIOS and is launched
by the BIOS internally. The embedded system diagnostics provides a set of
options for particular devices or device groups allowing you to:
• Run tests automatically or in an interactive mode
• Repeat tests
• Display or save test results
• Run thorough tests to introduce additional test options to provide extra
information about the failed device(s)
• View status messages that inform you if tests are completed successfully
• View error messages that inform you of problems encountered during testing
CAUTION: Use the system diagnostics to test only your computer.
Using this program with other computers may cause invalid results or
error messages.
NOTE: Some tests for specific devices require user interaction.
Always ensure that you are present at the computer terminal when
the diagnostic tests are performed.
For more information, see Dell EPSA Diagnostic 3.0 .
Running the ePSA diagnostics
1 Power-on the computer.
2 As the computer boots, press the F12 key as the Dell logo appears.
3 On the boot menu screen, select the Diagnostics option.
4 Click the arrow key at the bottom left corner.
Diagnostics front page is displayed.
5 Press the arrow in the lower-right corner to go to the page listing.
The items detected are listed.
196