ALGE-Timing TIMY2, Руководство пользователя

Страница: 12 / 32

Manual
TIMY2 - General
Page 12
Internal supply:
The battery compartment has space for 6 batteries type AA or rechargeable batteries. For
TIMY2 PXE you have to use the heat-sealed rechargeable battery-packs ONLY!
-20°C / -4F 20°C / 68F -20°C / -4F 20°C / 68F
Alkaline Batteries not possible not possible
NiMH Rechargeable NM-TIMY2 about 50 hours about 60 hours about 31 hours about 47 hours
Timy2
Timy2 XE Timy2 PXE
This measurement took place without the TIMY2 supplying external devices (e. g. no supply of
photocells) and for the PXE with 3 printed lines per minute.
Battery types:
Alkaline batteries: These batteries must never be used in a TIMY2 with integrated printer.
Alkaline batteries can only supply about 10 % of their original capacity at temperatures of -
20°C. Thus they are only recommendable for warm weather. On environmental reasons it is
also recommendable that rechargeable batteries are used.
NiMH battery pack NM-TIMY2: The NiMH rechargeable battery pack is recommended for
every TIMY2. These newly developed batteries dispose of an enormous persistance even at
very low temperatures and can supply a high current for the printer.
Charging:
The rechargeable batteries are charged inside the TIMY2 with charger PS12 or PS12A, no
matter if the TIMY2 is switched on or off. The charging period with NiMH batteries (NM-TIMY2)
takes with 1.5 Ah approx. 14 hours.
Charging Switch:
The TIMY2 has got a switch (hidden behind the
battery label) for switching on or off the rechargea-
ble battery charging.
Using alkaline batteries, the charging must be
switched off -position ALKALI-, as otherwise the
batteries may leak.
During the operation with rechargeable batteries,
the switch should be on position NiCd/NiMH so that
the rechargeable batteries are charged.
Attention:
Never use alkaline batteries in a
TIMY2 when the charging switch is set
on NiCd/NiMH and a charger is connected.
Operating period:
The operating period depends on the TIMY2 model, the batteries utilized and the ambient
temperature.