ALGE-Timing TIMY2, Руководство пользователя

Страница: 20 / 32

Manual
TIMY2 - General
Page 20
10.2.5 LANGUAGE
You can adjust the following languages as defaults for the TIMY2
•
<GERMAN>
•
<ENGLISH>
•
<FRENCH>
•
<ITALIAN>
•
<SPANISH>
•
<SCHWEDISH>
10.2.6 STANDARD
Reset the TIMY2 to the factory defaults.
•
<STANDARD-SETT>
10.2.7 HARDWARE
This menu is only available for our service technicians.
10.2.8 HARDWARE 2
This menu is only available for our service technicians.
10.2.9 PROGS ON OFF
As standard all programs are activated. The programs that are not used can be hidden to re-
duce the select list. Hidden programs can be activated any time in this menu again.
10.3 CHANNELS
Configuration of the timing channels:
10.3.1 INTERNAL
10.3.1.1 DELAY TIME
The delay time of the internal timing channels c0, c1, c2, c3, c4, c5, c6, c7 and c8 can be set.
Delay time is the time after which the channel is blocked after an impulse, to prevent multiple
impulses (see point 5.2).
•
<DELAY START C0> standard is 1.00 second
•
<DELAY C1-C8> standard is 0.30 second
•
<DELAY C1> not always available!
•
<DELAY C2>
•
<DELAY C3>
•
<DELAY C4>
•
<DELAY C5>
•
<DELAY C6>
•
<DELAY C7<
•
<DELAY C8>
10.3.1.2 TED-CORRECTION
For automatic correction of each channel when impulses are transmitted with 0.1 seconds
delay by the TED.
10.3.1.3 EDGE
Setting of triggering the impulses either on closing and/or opening. Standard for all channels is
on closing.