ALGE-Timing TIMY2, Руководство пользователя

Страница: 19 / 32

Manual
TIMY2 - General
Page 19
10.2.1.1 PRECISION
Setting of calculation precision. Only for net times!
•
<1s> calculated times in seconds
•
<1/10> calculated times in 1/10 seconds
•
<1/100> calculated times in 1/100 seconds
•
<1/1000> calculated times in 1/1 000 seconds
•
<1/10000> calculated times in 1/10 000 seconds
10.2.1.2 ROUNDING
All times are always calculated in day times in 1/10 000 seconds. For conversion to the
runtime at the required precision, one of the following three methods can be chosen:
•
<CUT> cuts off the figures not displayed
•
<UP> rounds up the last displayed figure
•
<ROUND> mathematical rounding of last displayed figure
10.2.2 CHANGE HEAT
Depending on the active program, this item enables moving on to the next heat.
10.2.3 STN-AUTOMATIC
The TIMY2 supports different types of automatic start number continuation for the competitors
at start and finish.
10.2.3.1 START
Controls the start number continuation for competitors at the start.
•
<MANUALLY>
•
<UP>
•
<DOWN>
10.2.3.2 FINISH
Controls the start number continuation for competitors reaching the finish.
•
<MANUALLY> no automatic continuation
•
<START> only 1 competitor on track from start to finish
•
<FINISH > several competitors on track, according to starting order
10.2.3.3 AUTOMATIC-TIME
Set a minimum and maximum runtime. If an impulse is received before the minimum time has
expired an invalid time is registered. If the maximum time has expired the finish start number
is automatically forwarded to the next started competitor.
•
<AUTOTIME-MIN> Standard: 00:00:00 = function disabled
•
<AUTOTIME-MAX> Standard: 00:00:00 = function disabled
10.2.4 SEC-MODE
This function sets if runtime is displayed in min/sec or just sec. Not available in all programs
•
<NO> Runtime in hh:mm:ss.th
•
<YES> Runtime in ssss:th