ALGE-Timing TIMY2, Руководство пользователя

Страница: 13 / 32

Manual
TIMY2 - General
Page 13
3 Printer
TIMY2 PXE has an integrated thermal printer. The best paper for the printer is our
ALGE
paper.
It is recognizable by the
ALGE
logo print on the reverse side, available with your
ALGE
repre-
sentative.
3.1 Change of Paper
•
open printer cap
•
take out the paper axis
•
place the axis inside the paper roll
•
insert paper roll with axis into TIMY2
•
thread paper through tear-off edge
•
close printer cap
4 Synchronising
•
connect TIMY2 with cable 000-xx or 004-xx to
other timing devices.
•
switch on the TIMY2
•
clear or retain memory
•
retain time and date or correct it and confirm or
trigger with START key or via channel C0.
4.1 Synchronisation of Other Devices
with a TIMY2:
The TIMY2 can send a synchronisation signal via chan-
nel 0 every full minute when using the programs BACK-
UP or PC-TIMER.
•
connect the TIMY2 with the device to be
synchronized
•
enter the time of day (next full minute) to be synchronized at the device
•
press and hold both keys, the green and red OK key of the TIMY2; on the full mi-
nute the TIMY2 sends a synchronisation impulse. The time of day of the timing
device now runs.