background image

CSM_H2F-D_DS_E_3_1

1

Motor Time Switch

H2F-D

ON/OFF Control 48 Times per Day in 15-min 
Increments

The H2F-D is a Low-cost Time Switch for Affordable 
Operation in a Compact DIN 72 x 72-mm Body. 
Choose the Ideal Model to Match the Application.

• Just insert the trippers for easy setup.

• Make exact time settings using the dial.

• Three mounting methods.

• Lineup includes models with power interruption backup.

• Safety standards: UL and CSA (except for H2F-30/-31).

 

The H2F-DM, -DMC, -DMF, -DMFC, -30, and -31 use 
nickel metal hydride batteries. 

Dispose of the batteries at a battery recycling location.
Replacement batteries are not available for previous H2F 
Time Switches from March 2006 and earlier. Replace the 
entire H2F Time Switch. Refer to 

Notice

 on page 7.

P S

 

72 mm

72 mm

For the most recent information on models that have been certified for 
safety standards, refer to your OMRON website.

Ordering Information

Note:

Always use the Time Switch with the Y92S-42 Battery mounted.

Accessories (Order Separately)

Control 

cycle

Drive 

method

Power 

interruption 

backup

Power supply 

voltage

Mounting

method

Flush mounting

Surface mounting/

track mounting

Control

output

SPST-NO

SPDT

SPST-NO

SPDT

Daily 
(24 hours)

Synchronous 
motor

No

100/110/120 VAC

Model

H2F-D

H2F-DC

H2F-DF

H2F-DFC

200/220/240 VAC

H2F-D

H2F-DC

H2F-DF

H2F-DFC

Quartz motor 
(See note.)

Yes

100 to 240 VAC

H2F-DM

H2F-DMC

H2F-DMF

H2F-DMFC

12 to 24 VDC

H2F-30

---

---

H2F-31

Name

Model

Trippers (1 set for ON and OFF) (See note 1.) Y92S-21

Battery (See note 2.)

Y92S-42

Note: 1.

Three gold-colored trippers for ON and three silver-colored 
trippers for OFF are enclosed with the H2F-D. Separately order 
trippers if more are required.

2.

The battery is built into the H2F-D. When the battery is nearing the 
end of its service life, order the model number listed at the left.

Содержание H2F-D









Отзывы: