H2F-D
4
Connections
Synchronous Motor Models: SPST-NO
Output
Synchronous Motor Models: SPDT
Output
Note:
100-V-class models differ from 200-V-class models. They cannot be used together.
Quartz Motor Models: SPST-NO Output
Quartz Motor Models: SPDT Output
Note: 1.
Use a separate power supply for the load.
2.
Screw tightening torque:
Maximum torque: 0.98 N·m
3.
Use the same type of lead wires when connecting lead wires to the terminal block. If different wire types are used, it will not be possible
to tighten the thin lead wires, and the wires may become disconnected during use.
4.
Recommended wire: AWG 18 to 24 (cross-sectional area: 0.205 to 0.823 mm
2
), solid wire or twisted wire.
5.
Do not connect more than two crimp terminals to the same terminal.
Nomenclature
H2F-D
H2F-DF
H2F-DC
H2F-DFC
H2F-DM, H2F-30
H2F-DMF
Note:
On the H2F-30 (12 to 24 VDC),
terminal number 2 is positive and
terminal number 3 is negative.
H2F-DMC
H2F-DMFC, H2F-31
Note:
On the H2F-31 (12 to 24 VDC),
terminal number 2 is positive and
terminal number 3 is negative.
Mo
u
nting Holes
O
N
/OFF operation
selector kno
b
Dial rotation direction
(clock
w
ise)
Man
u
al s
w
itch
Time setting kno
b
Holes for spare trippers
Po
w
er indicator (red)
(See note.)
Dial
Tripper
Gold: O
N
time setting
Sil
v
er: OFF time setting
Mo
u
nting Holes
PO
W
ER
Note:
Only quartz motor models have a power indicator.
■
Time Setting
Insert the trippers into the scale graduation
at the desired times.
•
Insert gold trippers for times the load is to
be turned ON and silver trippers for times
the load is to be turned OFF.
Note: 1.
Be sure to insert the trippers all
the way.
2.
Set the trippers in alternating
positions only after thoroughly
checking the ON and OFF
positions.
