9
Install the Top Cover. The Top Cover should be placed from the back forward at a slight angle.
Simply align the back exhaust opening with the Exhaust Assembly back side and slide forward until all
Top Cover sides rest one the perimeter of the oven walls.
When fully assembled, all components would be placed as shown on
Figure # 4:
Your
Artisan
™
Pizza Oven is now fully assembled and ready for its gas connection.
GAS CONNECTION—LIQUID PROPANE (LP)
NEVER CONNECT THE PIZZA OVEN TO AN UNREGULATED GAS SUPPLY.
Before proceeding, ensure the oven is fitted for LP gas. Connecting to an improper gas type will result in
poor performance and increased risk of damage or injury. Total gas consumption (per hour) with all
burners set on “HI” is a follows:
Hearth & Back Burners
37,000 BTUH Total
The installation of this appliance must conform with local codes or, in the absence of local codes, to the
national fuel gas code, ANSI Z223.1a-1988. Installation in Canada must be in accordance with the
Standard CAN/ CGA-B149.1 Natural Gas Installation or CAN/CGA-B149.2, Propane Installation Code.
Manifold pressure with LP
Operating: 10.0” W.C.
Non-operating:
11.2” W.C.
EXHAUST ASSEMBLY
TOP STONE
(
SHOWN INSIDE EXHAUST ASSEMBLY)
NOTCH
Figure # 3
SUPPORT BAR
Figure # 4
HEARTH STONE
HEARTH STONE
TOP STONE
TOP COVER
FRONT COVER
EXHAUST PLENUM
ASSEMBLY
