Alcatel 060170-10, Руководство пользователя

Страница: 290 / 430

VoIP Commands
Page 5-148
Command Usage
Set outbound caller ID number (published/non-published) number to transmit.
Syntax Options
Remarks
Caller ID time is automatically determined (read) from the system time on the switch. If the
caller ID name or number is changed, the voice switching daughtercard is initialized with the
time automatically.
voice signaling caller id number
voice signaling channel <
slot/port/startChannel-endChannel
> caller id number {
“callerIdNumber”
| private | unavailable}
Definitions:
slot Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
callerIdNumber
Identifies the caller by number, (e.g.,
8188803500
); maximum length of ten characters
(only 0-9 allowed)
;
no _ (underscores) or spaces allowed.
private
Sets outbound originating caller ID number that transmits to “private”.
unavailable
Sets outbound originating caller ID number that transmits to “unavailable”.
♦
Syntax Note
♦
The
voice coding profile caller id
command must be enabled to
use this command.
Default:
The default setting is
private
.
Command Examples:
voice signaling channel 2/1/1-12 caller id number “8188803500”
voice signaling channel 2/1/1-12 caller id number “8188803500” private
voice signaling channel 2/2/13-24 caller id number 8188803501” unavailable