Alcatel 060170-10, Руководство пользователя

Страница: 210 / 430

VoIP Commands
Page 5-68
Command Usage
Specify the protocol to use for Telephony Signaling.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
To use this command for ISDN, the voice daughtercard connection type must be set to ISDN
PRI E1 via the
voice port interface type
command. If use of the ISDN protocol for Telephony
Signaling is specified, then all channels on the port must be set to ISDN (E1 ISDN PRI or BRI
Euro); the setting must also match the daughtercard connection type set via the
voice port
interface type
command.
voice signaling protocol
voice signaling channel <
slot/port/startChannel-endChannel
> protocol {fxs ls | fxo ls | fxs gs | fxo gs
| emi | emd | emw | isdn}
Definitions:
slot Specifies chassis slot number where VSM is installed (e.g.,
2
).
port
Specifies physical port number on voice daughtercard (e.g.,
1
).
fxs ls
Specifies (CAS) foreign exchange station loop start signaling as the signaling protocol.
fxo ls
Specifies (CAS) foreign exchange office loop start as the signaling protocol.
fxs gs
Specifies (CAS) foreign exchange station ground start as the signaling protocol.
fxo gs
Specifies (CAS) foreign exchange office ground start as the signaling protocol.
emi
Specifies (CAS) E&M (ear & mouth) immediate start as the signaling protocol.
emd
Specifies (CAS) E&M (ear & mouth) delay start as the signaling protocol.
emw
Specifies (CAS) E&M (ear & mouth) wink start as the signaling protocol.
isdn
Specifies (CCS) Integrated Services Digital Network (ISDN) as the signaling protocol.
Default:
The default setting is
fxs ls
.
Command Examples:
voice signaling channel 2/1/1-12 protocol fxs ls
voice signaling channel 2/2/13-24 protocol fxo gs
voice signaling channel 2/3/1-30 protocol emw
voice signaling channel 2/4/1-30 protocol isdn