Alcatel 060170-10, Руководство пользователя

Страница: 237 / 430

VoIP Commands
Page 5-95
Command Usage
Specify time to ignore tone (digits) after Ear & Mouth wink.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
voice signaling emw in wink digit ignore
voice signaling channel <
slot/port/startChannel-endChannel
> emw in wink digit ignore <
value
>
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value Specifies the period of time, in milliseconds from 5 to 1,000, (e.g.,
30
)., after the wink to
ignore tones (digits) for incoming calls.
♦
Syntax Note
♦
Do not
use commas when entering the value for E&M time to
ignore digits for incoming after wink (for example,
1,000
will
return a syntax error message).
Default:
The default value is
30
milliseconds.
Command Examples:
voice signaling channel 2/1 1-12 emw in wink digit ignore 30
voice signaling channel 2/2 13-24 emw in wink digit ignore 5
voice signaling channel 2/3 1-30 emw in wink digit ignore 1000