Alcatel 060170-10, Руководство пользователя

Страница: 226 / 430

VoIP Commands
Page 5-84
Command Usage
Specify E&M Signaling time to wait before declaring off-hook (clear detect), i.e., time off-hook
before call clearing is declared.
Syntax Options
Remarks
In order to use this command, the
voice signaling protocol
command must be set to the corre-
sponding protocol type of E&M Wink Start, Immediate Start, or Delay Start Signaling.
voice signaling em clear detect
voice signaling channel <
slot/port/startChannel-endChannel
> em clear detect <
value
>
Definitions:
slot Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the
E-lead
clear detect (delay interval) in milliseconds from 5 to 5,000, (e.g.,
50
)
before call clearing is declared. M-lead needs to be on-hook before call clearing can be
declared.
♦
Syntax Note
♦
Do not
use commas when entering the E&M clear detect value
on the M-lead (for example,
5,000
will return a syntax error
message).
Default:
The default value is
400
.
Command Examples:
voice signaling channel 2/2/13-24 em clear detect 400
voice signaling channel 2/3/1-30 em clear detect 5000