Alcatel 060170-10, Руководство пользователя

Страница: 278 / 430

VoIP Commands
Page 5-136
Command Usage
Set Foreign Exchange Station Ground Start (FXS GS) ring ID, or continental ring tone vari-
ance for North America or Europe.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
The ring cadence that is set for the first channel on the first port is automatically set for all
remaining FXS/FXO ports.
All ports must have the same ring cadence.
On the OmniAccess 512, the ring cadence can only be specified for port 1.
On the Omni Switch/Router, the ring cadence can only be specified for port 1 (or 9 for a dual
VSA-FXS/FXS in an HSX-H).
voice signaling fxs gs ring id
voice signaling channel <
slot/port/startChannel-endChannel
> fxs gs ring id {0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
default}
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
0, 1, 2, 3, 4, 5, 6, 7
Specifies variance in continental ring tone for either North America or Europe (e.g.,
2
) as
per selected coefficient. The value
0
is the same as
default
.
default
Sets the tone variance to the default setting, i.e, 0.
♦
Syntax Note
♦
This command must be set in relation to the
voice signaling
fxs gs ring cadence coefficient
command.
Default:
The default value is
0
.
Command Examples:
voice signaling channel 2/1/1-12 fxs gs ring ID default
voice signaling channel 2/2/13-24 fxs gs ring ID 0
voice signaling channel 2/3/1-30 fxs gs ring ID 7